Waste soybean frying oil for the production, extraction, and characterization of cell-wall-associated lipases from Yarrowia lipolytica.

The lipolytic yeast Yarrowia lipolytica produces cell-wall-associated lipases, namely Lip7p and Lip8p, that could have interesting properties as catalyst either in free (released lipase fraction-RLF) or cell-associated (cell-bound lipase fraction-CBLF) forms. Herein, a mixture of waste soybean frying oil, yeast extract and bactopeptone was found to favor the enzyme production. Best parameters for lipase activation and release from the cell wall by means of acoustic wave treatment were defined as: 26 W/cm2 for 1 min for CBLF and 52 W/cm2 for 2 min for RLF. Optimal pH and temperature values for lipase activity together with storage conditions were similar for both the free enzyme and cell-associated one: pH 7.0; T = 37 °C; and > 70% residual activity for 60 days at 4, - 4 °C and for 15 days at 30 °C.

Studies on the volatile fraction composition of three native Amazonian-Brazilian fruits: Murici (Byrsonima crassifolia L., Malpighiaceae), bacuri (Platonia insignis M., Clusiaceae), and sapodilla (Manilkara sapota L., Sapotaceae).

The volatile fraction of murici, bacuri and sapodilla are here studied because of their increasing interest for consumers, abundance of production in Brazil, and the general demand for new flavors and aromas. Their volatile profiles were studied by two High Concentration Capacity Headspace techniques (HCC-HS), Headspace Solid Phase Microextraction (HS-SPME) and Headspace Sorptive Extraction (HSSE), in combination with GC-MS. Murici volatile fraction mainly contains esters (38%), carboxylic acids (19%), aldehydes (11%), alcohols (14%), others (13%) and sulfur compounds; bacuri is characterized by terpenes (41%), non-terpenic alcohols (24%), esters (15%), aldehydes (6%), and others (12%); sapodilla consists of esters (33%), alcohols (27%), terpenes (18%) and others (21%). The GC-MS component co-elution was overcome by GC×GC-qMS. The adoption of modern analysis technologies afforded to achieve a better knowledge of the volatile fraction composition of these fruit pulps by increasing substantially the number of compounds identified.

Chlorhexidine-loaded hydroxyapatite microspheres as an antimicrobial delivery system and its effect on in vivo osteo-conductive properties.

Hydroxyapatite (HA) has been investigated as a delivery system for antimicrobial and antibacterial agents to simultaneously stimulate bone regeneration and prevent infection. Despite evidence supporting the bactericidal efficiency of these HA carriers, few studies have focused on the effect of this association on bone regeneration. In this work, we evaluated the physico-chemical properties of hydroxyapatite microspheres loaded with chlorhexidine (CHX) at two different concentrations, 0.9 and 9.1 µgCHX/cm2 HA, and characterized their effects on in vitro osteoblast viability and bone regeneration. Ultraviolet-visible spectroscopy, scanning and transmission electron microscopy associated with energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy were used to characterize the association of CHX and HA nanoparticles. The high CHX loading dose induced formation of organic CHX plate-like aggregates on the HA surface, whereas a Langmuir film was formed at the low CHX surface concentration. Quantitative evaluation of murine osteoblast viability parameters, including adhesion, mitochondrial activity and membrane integrity of cells exposed to HA/CHX extracts, revealed a cytotoxic effect for both loading concentrations. Histomorphological analysis upon implantation into the dorsal connective tissues and calvaria of rats for 7 and 42 days showed that the high CHX concentration induced the infiltration of inflammatory cells, resulting in retarded bone growth. Despite a strong decrease in in vitro cell viability, the low CHX loading dose did not impair the biocompatibility and osteoconductivity of HA during bone repair. These results indicate that high antimicrobial doses may activate a strong local inflammatory response and disrupt the long-term osteoconductive properties of CHX-HA delivery systems.

Adsorption of chlorhexidine on synthetic hydroxyapatite and in vitro biological activity.

The kinetic of chlorhexidine digluconate (CHXDG) uptake from aqueous solution by hydroxyapatite (HA) was investigated by ultraviolet (UV) analysis performed in HA powder (UV-solid) after the CHX adsorption. Adsorption isotherm of chlorhexidine (CHX) uptake was modeled by a combination of Languimir and Langmuir-Freundlich mechanisms. Strong molecule-molecule interactions and positive cooperativity predominated in the surface when CHX concentration was above 8.6 µg(CHX)/mg(HA). UV-solid spectra (shape, intensity and band position) of CHX bound to HA revealed that long-range molecular structures, such as aggregates or micelles, started to be formed at low CHX concentrations (1.52 µg(CHX)/mg(HA)) and predominated at high concentrations. Grazing-incidence X-ray diffraction (GIXRD) analysis from synchrotron radiation discarded the formation of crystalline structures on HA surface or precipitation of CHX crystalline salts, as suggested in previous works. The effect of the HA/CHX association on HA in vitro bioactivity, cytotoxicity and CHX antimicrobial activity was evaluated. It was shown that CHX did not inhibit the precipitation of a poorly crystalline apatite at HA/CHX surface after soaking in simulating body fluid (SBF). Cell viability studies after exposure to extracts of HA and HA/CHX showed that both biomaterials did not present significant in vitro toxicity. Moreover, HA/CHX inhibited Enterococcus faecalis growth for up to 6 days, revealing that binding to HA did not affect antimicrobial activity of CHX and reduced bacterial adhesion. These results suggested that HA/CHX association could result in a potential adjuvant antimicrobial system for clinical use.

Optimization of oxygen mass transfer in a multiphase bioreactor with perfluorodecalin as a second liquid phase.

Oxygenation is an important parameter involved in the design and operation of mixing-sparging bioreactors and it can be analyzed by means of the oxygen mass transfer coefficient (k(L)a). The operational conditions of a stirred, submerged aerated 2-L bioreactor have been optimized by studying the influence of a second liquid phase with higher oxygen affinity (perfluorodecalin or olive oil) in the k(L)a. Using k(L)a measurements, the influence of the following parameters on the oxygen transfer rate was evaluated: the volume of working medium, the type of impellers and their position, the organic phase concentration, the aqueous phase composition, and the concentration of inactive biomass. This study shows that the best experimental conditions were achieved with a perfluorodecalin volume fraction of 0.20, mixing using two Rushton turbines with six vertical blades and in the presence of YPD medium as the aqueous phase, with a k(L)a value of 64.6 h(-1). The addition of 20% of perfluorodecalin in these conditions provided a k(L)a enhancement of 25% when pure water was the aqueous phase and a 230% enhancement when YPD medium was used in comparison to their respective controls (no perfluorodecalin). Furthermore it is shown that the presence of olive oil as a second liquid phase is not beneficial to the oxygen transfer rate enhancement, leading to a decrease in the k(L)a values for all the concentrations studied. It was also observed that the magnitude of the enhancement of the k(L)a values by perfluorodecalin depends on the biomass concentration present.

Comparison of alpha-tocopherol microparticles produced with different wall materials: pea protein a new interesting alternative.

Alpha-tocopherol is a radical chain breaking antioxidant that can protect the integrity of tissues and play an important role in life process. Microparticles containing alpha-tocopherol were produced by spray drying technique using pea protein (PP), carboxymethylcellulose(CMC) and mixtures of these materials with maltodextrin (PP-M and CMC-M) as wall materials. The microparticles produced were characterised as regards the core retention (high performance liquid chromatography), the morphology (scanning electron microscopy) and size distribution (laser diffraction). The retention of alpha-tocopherol within all microparticles was above 77%. They showed a spherical shape and roughness at varied degrees. Their mean particles size remained below 7 microm, and the smallest sizes were found in PP and CMC-M microparticles. The results obtained in this work show that the pea protein use for alpha-tocopherol microencapsulation is a promising system for further application in food.

New microencapsulation system for ascorbic acid using pea protein concentrate as coat protector.

Microencapsulation is essential to preserve biological activity of ascorbic acid (AA) and pea protein has not been used as a carrier in such processes. This work aimed to produce microparticles by a spray-drying process using pea protein (PPC) as wall material of AA and evaluate the retention of the core by HPLC, overall morphology SEM, size distribution by light scattering and release kinetics. Carboxymethylcellulose (CMC) and blends with maltodextrin (M) were produced for comparative analyses. The yields were compatible with the applied technology and the retention was above 84% for all materials. The PPC microparticles presented irregular and rough surfaces, CMC produced a regular and smooth surface and agglomeration was more intense in microparticles with M. Mean particle diameters were all below 8 microm. The microparticle release rates were lower than those with free AA, being best correlated to the Higuchi kinetic model. These results support the utilization of PPC for microencapsulation of AA.

Electrical stimulation of saccharomyces cerevisiae cultures

Modulação do potencial de membrana celular endógeno por um campo elétrico externo influencia a estrutura e função dos compartimentos da membrana, de suas proteínas e da bi-camada lipídica. Neste trabalho, os efeitos da aplicação de potencial no crescimento de Saccharomyces cerevisiae foram caracterizados por experimentos simples, mas conclusivos. O perfil temporal de crescimento celular e a divisão celular foram investigados como respostas macroscópicas ao estímulo elétrico. Experimentos controle foram conduzidos em condições idênticas, exceto pela ausência de potencial aplicado. Através de análise comparativa, verificou-se que o estímulo elétrico alterou o ciclo celular como foi possível observar através da medida da dispersão de tamanho celular de cada população, sugerindo um possível sincronismo na divisão celular. Análise do espectro de potência foi empregada para sustentar o aumento no sincronismo, e uma modelagem matemática foi conduzida para determinar mudanças na cinética de crescimento celular. Parâmetros cinéticos do modelo tipo Monod para crescimento foram determinados por regressão não-linear. A constante de afinidade (a saber, KS) apresentou uma dependência com o potencial aplicado, sugerindo mudanças no transporte através da membrana celular. Verificou-se, também, que o estresse promovido eletroquimicamente inibiu o crescimento e induziu mudanças na viabilidade celular.